AEG LAVMAT BELLA 1003/803 - Manual (Page 8)

Controls
Selector buttons Control lamp
Programme switch Temperature control
1) Programme switch
The programme switch has 8 settings
for the basic programmes:
1 wash programme with prewash
2 wash programme without prewash
3 fabric softening — starching —
spinning
4 pumping — spinning
5 woollens
6 short spin (automatic SL action)
7 soaking — extra prewash
8 pumping
With the exception of woollens, you
can wash ail fabrics with or without
prewash, depending on their degree of
soiling. Wooilens are washed on a
main wash only.
The programme selector should al­
ways be operated rn clockwise direc­
tion.
2) Temperature cojpl
With the temper^.dre control is in posi­
tion ’0’ you can actually wash cold
(woollens for example). Between 30°C
and 95°C the temperature is infinitely
variable.
Please note the washing instructions
on the labels Inside your garments.
3) Selector buttons
Button Switch on
Button Q] Switch off
When depressing button you
cancel the function of ail other
buttons.
Button VIll
Economy button for small loads
This economy button means that you
need not to work with the same water,
power and washing powder consump­
tion as for full loads. Instead, you can
make savings all round.
Effect: reduced water level during
washing and rinsing. Depending on the
actual programme, you save up to 45 %
of water, up to 45% power and up to
20% time. The amount of washing
powder is also reduced.
Application: for small loads — about
half a drum full (up to 2Vz kg of whites
and coloureds, up to 0.8 kg of
care fabrics and synthetics).
Used with programmes 1, 2, 3.
Please note, that optimal economy . id
that the most favourable consump n
of water, electricity and wash pov jr
can only be achieved when the full
capacity of the drum is used.
Button [ e ] Energy saving
By selecting this button in conjunction
with programme 1 or 2 the water tem­
perature is limited to 60°C and the
length of the wash is extended to that