ADT Security Services 6112 - Manual (Page 7)

Arm the Perimeter without Delays
Cl
I have this feature.
G I do not have this feature.
COMMAND 2 is used to arm only the perimeter of your
building, leaving the interior of the building disarmed. This
command allows no exit or entry delay time through the
perimeter, including the designated delay door. Although this
command does not send a "Closing Report" to the Central
Staion, it will still send alarms. Enter your personal passcode,
plus EHT , to cancel COMMAND 2.
Application
This arming command is useful in residential systems at night
when everyone is home and ready to retire for the evening.
In commercial installations, this arming command is useful when
you are working late and you want the perimeter of the building
armed until you are ready to leave.
COMMAND
Arming with COMMAND 2:
1. Ensure that all perimeter zones are secure. (Interior zones are
not armed with this command, and may remain faulted while
arming with COMMAND 2.)
2
.
Press the
indicator light comes on. bar. The Command Mode
3. Press the ||| key. The PERIMETER and INSTANT
4.
indicator lights come on. This indicates that the perimeter
zones are armed without entry/exit delay time.
To disarm your security system or cancel COMMAND 2,
enter your personal passcode and press
delay time expires. ENT before the
11
Arm the Perimeter with Delays
G I have this feature.
G
I do not have this feature.
COMMAND 3 is used to arm only the perimeter of your
building, leaving the interior of the building disarmed. Once you
have entered COMMAND 3, the exit delay time starts. You now
have a predetermined amount of time to leave before the perimeter
arms. Although this command does not send a "Closing Report"
to the Central Station, it will still send alarms. Enter your
personal passcode and press
ENT , to cancel COMMAND 3.
Application
This arming command is useful in residential systems when you
are leaving, but members of your family, a babysitter, or a pet,
are still inside the house.
In commercial installations, use this command to rearm your
system when you are on the premises, but not yet open for
business. This command will not send a "Closing Report" to the
Central Station.
COMMAND
Arming with COMMAND 3:
1. Ensure that all perimeter zones are secure. (Interior zones are
not armed with this command and may remain faulted while
arming with COMMAND 3.
2. Press the COMMAND bar. The Command Mode
indicator light comes on.
3. Press the 3
4.
key. The PERIMETER indicator light
flashes. This indicates that the system has begun exit delay
time. When the delay time expires, the light remains steady.
To disarm your security system or cancel COMMAND 3,
enter your personal passcode and press ||||j|||| before the
delay time expires.
12