ADT Security Services 6112 - Manual (Page 11)

Perimeter Watch Mode
O I have this feature.
C!) I do not have this feature.
COMMAND 6 is used to monitor the perimeter of your building
when the system is disarmed. This is called the Perimeter Watch
Mode. In this mode, the Command Center emits a short beep
tone to alert you of entry or exit through the perimeter of your
building. No alarms are generated by this mode except 24-hour
alarms (e.g.: fire, panic, duress, etc.). There is no tone for
interior movement.
Application
This command is useful in a residential system when you want to
monitor entrances or exits in your home.
In commercial installations, the Perimeter Watch Mode can be
used as a door chime to alert you when a customer or delivery
person has entered your business.
COMMAND
To use COMMAND 6:
1. Ensure that your security system is disarmed.
bar. The Command Mode 2. Press the COMMAND
indicator light comes on.
3. Press the ||| key. The system is now in Perimeter Watch
Mode.
4. To exit the Perimeter Watch Mode, press the COMMAND
bar, and then the ||| key.
Special Alert
O I have this feature,
d I do not have this feature.
This command is a manually operated and initiated alarm
command. COMMAND 7 can be programmed to respond to a
choice of numerous situations that may need immediate attention.
This command may also be used to send a silent alarm to the
Central Station without sounding an alarm signal on the
premises. Check with your alarm company for the options they
offer.
19
COMMAND
To engage COMMAND 7:
1. Press the I COMMAND I bar. The Command Mode
indicator light comes on.
2. Press the
3. This COMMAND is used for the purpose of:
□ My system will create an audible alarm when using this
COMMAND.
d My system will not create an audible alarm when using this
COMMAND.
20