Vermont Casting P - Manual (Page 7)

20007967 7
Grate Placement
Grate Assembly
Place grate assembly over top of burner so the
front middle leg of the grate is 1¹⁄₂” back from
the front edge of the main burner pan assembly.
(Fig. 7)
Add Pan Material
1. With burner pan and grate in place, open the
bag of lava rock and spread it evenly across the
pan assembly to the top of the pan assembly. (Fig.
8)
2. Open one bag of glowing embers and place
evenly across burner covering lava rock. (Fig. 9)
3. Slide the mesh screen under the grate, but on
top of glowing embers so the mesh piece covers
the burner pan material. (Fig. 10)
4. Open remaining bag of embers and place
evenly on top of mesh screen. (Fig. 10)
5. Spread lava rock onto fireplace hearth around
the burner pan for decorative purposes. (Fig. 11)
Fig. 7 Grate placement.
FP1487
grate placement
5/10/04 djt
1¹⁄₂"
FP1487
FP1488
OD24 lava rock
5/10/04 djt
Lava
Rock
FP1488
Fig. 8 Lava rock placement.
Pan
Assembly
FP1489
ember placement
5/10/04 djt
Glowing Embers
FP1489
Fig. 9 Ember placement.
FP1490
screen placement
5/10/04 djt
Ember Screen
Embers
FP1490
Fig. 10 Screen and ember placement.
FP1491
lava rock placement
5/10/04 djt
FP1491
Fig. 11 Place lava rock on fireplace hearth for decoration.
Lava Rock