Garmin eTrex Legend Cx - Manual (Page 14)

4 eTrex Venture Cx and Legend Cx Owner’s Manual
G
ETTING
S
TARTED
> T
URNING ON THE E
T
REX
Turning on the eTrex
When you turn on the eTrex, the Welcome page
appears, followed by the Satellite Page. The unit must
collect satellite data and establish its current location.
To turn the eTrex on and off:
1. Press and hold the Power key. When the unit
turns on, a tone sounds, and the Introduction
Page appears, followed by the Satellite Page.
2. To turn off the eTrex, press and hold the
Power key again.
Adjusting the Backlight
You may want to adjust the backlight to see the screen
better.
To adjust the backlight level:
1. Press and quickly release the Power key.
2. Press up on the Rocker to increase the
brightness, or press down to decrease.
3. Press Enter or the Quit key to close the
backlight adjustment window.
Backlight Adjustment Slider
See page 58 for information about changing the
display colors, backlight timeout, and brightness
levels.
Welcome Page
(Legend Cx Welcome Page shown)
Satellite Page