Carrier Infinity SYSTXCCUID01-V - Manual (Page 36)

ADVANCED SETUP 33
Vacation Settings
You can pre-select temperature, humidity and fan settings for your
VACATION function. These settings will take effect when you acti-
vate VACATION operation as outlined on pages 11-12.
1 Flip down the door near the base of the Infinity
™
Control.
2 Press the ADVANCED setup button.
3 Press the RIGHT button four times to select the VACATION
screen (5 of 7)..
4 Use the TEMP (+\-) button to select the highest temperature the
system will allow during VACATION operation.
5 Press down on the SCROLL button to select MIN TEMPERA-
TURE.
6 Use the TEMP (+\-) button to select the lowest temperature the
system will allow during VACATION operation.
7 Press down on the SCROLL button to select MAX HUMIDITY.
8 Use the TEMP (+\-) button to select the highest humidity the
system will allow during VACATION operation.
9 Press down on the SCROLL button to select MIN HUMIDITY.
10 Use the TEMP (+\-) button to select the lowest humidity the sys-
tem will allow during VACATION operation.
11 Press down on the SCROLL button to select FAN.
12 Use the TEMP (+\-) button to select AUTO, LOW, MED or HIGH
fan operation.
13 To exit, press ADVANCED or simply close the door.
NOTE: You can exit at any time. When exiting, you will be
prompted to save changes if you have made any. Select “YES”
to save your changes, “NO” to revert back to previous settings.