Final check, Controls – MTD 113-120A User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Starter
Rope
12.
Slip the starter rope into the rope guide bolt
------ as shown in figure 10.
FIGURE 10.
FINAL CHECK
Check all nuts and boits for correct tightness.
A
CAUTION
Please note that the chute deflector
on your mower is in an upright posi
tion. It is held in the position by a
shipping block. This block is used
for shipping purposes only. It must
be removed and discarded before
your mower is put into operation.
-See figure 11.
FIGURE 11.
CONTROLS
Throttle
Control
Recoil
Starter
Blade Control
Handle
BLADE CONTROL HANDLE
WARNING
THIS CONTROL MECHANISM IS A
SAFETY DEVICE NEVER ATTEMPT
TO BYPASS ITS O P E R A T I O N S
The blade control handle is located on the upper
handle of the mower. See figure 12. The blade con
trol handle must be depressed in order to operate
the unit. Release the blade control handle to stop
the engine and blade.
'7
t w A ^ I N G
\
FIGURE 12.
The blade will be rotating whenever
the engine is running.