MTD 243-685A User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BELLEVILLE
WASHER (G)-
4. Place air duct assembly (P) over opening on top
of housing. Secure with two hand knobs (F) and
belleville washer (G). See figure 7.
ELASTIC
OPENING
TOP STRAP
OM BAG
/
'STUD PIN
ON HANDLE
SMALL STRAP
V
BAG (M)
5. Assemble the bag by slipping the top straps on
bag (M) over upper handle. Hook two small straps
over stud pins on handle. Slip elastic opening o,f
bag over air duct assembly. See figure 8.
NOTE
Be certain elastic on bag is placed over
the flanges on air duct assembly.
FIGURES.
HAIR PIN
COTTER (B)
CLUTCH GRIP
ASSEMBLY (A)
6
.
■CLEVIS PIN (C)
NOTE
Steps 6, 7 and 8 are for self-propelled
units only.
Assemble
the
clutch
grip
(A)
to
the
left
hand
side of upper handle. Secure in place with clevis
pin (C) and hair pin cotter (B). See figure 9. Head,
of clevis pin should be to the outside of handle.