MTD 213-380 User Manual
Rotary tiller, Model nos
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ЮФ
ROTARY TILLER
Model Nos.
213-380
213-385 «HI?
For one year from date of purchase, MTD Products Inc.
will replace for the original purchaser, free of charge,
F.O.B. factory or authorized service firm, any part or
parts found to be defective in material or workman
ship. All transportation charges on parts submitted
for replacement under this warranty must be paid by
the purchaser. This warranty does not include replace
ment of parts which become inoperative through mis
use, excessive use, accident, neglect, improper main
tenance or alterations by unauthorized persons. This
warranty does not include the engine, motor, battery,
battery charger or any component parts thereof. For
service on these units refer to the applicable manu
facturer's warranty.
The above warranty will apply only to the original
owner and will be effective only if the warranty card
has been properly processed. It will not apply where
the unit has been used commercially.
Warranty service is available through your local au
thorized service dealer or distributor. UNDER NO CIR
CUMSTANCES WILL THE RETURN OF A COMPLETE
UNIT BE ACCEPTED BY THE FACTORY UNLESS PRIOR
WRITTEN PERMISSION HAS BEEN EXTENDED.
1. Your tiller is a precision piece of power equipment.
Exercise extreme caution at all times.
2. Do not attempt to start engine with the clutch con
trol in the engaged or FORWARD position.
3. Stand clear of tines when starting engine. Never
stand in front of, or work on tines while the en
gine is running.
4. NEVER place hands or feet in the vicinity of the
tines while the engine is running.
5. Always stop engine when tiller is not in actual use.
6. Always disconnect spark plug wire during repairs
or refueling operations.
7. Do not fill gas tank while engine is running. Do not
spill gasoline on hot engine.
Your rotary tiller is a precision built machine designed
to take the work out of gardening and other related
chores. It can be used for seed bed preparation, tilling,
cultivating, furrowing, composting and mulching. Like
any other piece of power equipment, it requires a cer
tain amount of care and maintenance. In return for
this, it will give a maximum of service and efficiency.
Read these instructions carefully before assembling or
operating your tiller. Through proper care and opera
tion, you will obtain long, efficient service and trouble
free operation.
MTD PRODUCTS INC
5389 WEST 130th STREET • P. 0. BOX 2741 CLEVELAND OHIO 44111
FORM NO. 770-4121
Document Outline
- 5389 WEST 130th STREET • P. 0. BOX 2741 CLEVELAND OHIO 44111
- WHEELS
- DEPTH BAR
- Lock Pin
- THROTTLE-Assemble as shown in figure 6.
- CAUTION
- Handle Panel
- Conduit
- FIGURE 6. THROTTLE CONTROL
- CHECK LIST BEFORE OPERATION
- NOTE
- NOTE
- NOTE
- NOTE
- MAINTENANCE AND lUBRICATION
- BELT ADJUSTMENT
- BELT REPLACEMENT
- CHAIN CASE LUBRICATION
- NOTE
- Wheel Hanger
- NOTE
- BRIGGS & STRATTON, TECUMSEH AND PEERLESS PARTS AND SERVICE
- WARRANTY PARTS AND SERVICE POLICY