Identification of symbols, Safety rules, Warning – Poulan 1975 User Manual
Page 2: War nin g, Sb warning
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
IDENTIFICATION OF SYMBOLS
WARNING!
This chain
saw can be dangerous! Care
less or improper use can cause
serious or even fatal Injury.
ASways wear appropriate ear
protection, eye protection
and head protection.
Read and understand the
instruction manual before
using the chain saw.
Measured maximum kick
back value without chain
brake for the bar and chain
combination on the label.
Always use two hands when operating the chain saw.
WAR NIN G
! Contacting the guide bar tip with any object
should be avoided; tip contact may cause the guide bar to
move suddenly upward and backward, which may cause se
rious injury.
Starting Reminder
0 A
Move ON/STOP switch to
the ON position.
Puii 5X
® ^f
Prime
©è
Slowly press primer bulb
6 times.
Half Choke
FufI Choke
Pull choke/fast idle lever
out to the full extent (to
the FULL CHOKE posi
tion}.
Pul!
to Start
Puli the starter rope
sharply 5 times with your
right hand.
Push the choks/fast idle
iever in to the HALF
CHOKE position.
Puli the starter rope sharply
with your right hand until
the engine starts.
SAFETY RULES
SB WARNING:
Always disconnect
spark plug wire and place wire where it can
not contact spark plug to prevent accidental
starting when setting up, transporting, ad
justing or making repairs except carburetor
adjustments.
Because a chain saw is a high-speed wood
cutting tool, special safety precautions must
be observed to reduce the risk of accidents.
Careless or improper use of this tool can
cause serious injury.
PLAN AHEAD
• Read this manual carefully until you com-
pietely understand and can follow all safety
ruies, precautions, and operating instruc
tions before attempting to use the unit.
Restrict the use of your saw to adult users
who understand and can foliow safety
rules, precautions, and operating instruc
tions found in this manual.
Wear protective gear. Always use steel
toed safety footwear with non-slip soies;
snug-fitting clothing; heavy-duty, non-slip
gioves; eye protection such as non-fog
ging, vented goggles or face screen; an
approved safety hard hat; and sound barri
ers (ear piugs or mufflers) to protect your
hearing. Regular users should have hear
ing checked regularly as chain saw noise
can damage hearing. Secure hair above
shoulder length.