Ahaching bag to mower, C:ontrols, Blade control handle – MTD 110-518R000 User Manual
Page 10: Warning, Throttle control, Recoil starter, Controls
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Rear
Deflector
AHACHING BAG TO MOWER
Lift the rear deflector on the mower. Place the hooks
on the grass catcher over the pins on the back of the
mower. See figure 13. Release the rear deflector. Turn
the locking lever to the locked position to secure the
-rear deflector. See figure 13, inset.
To remove the grass catcher, turn the locking lever to
the unlocked position and lift the rear deflector on the
mower. Lift the grass catcher up, over the pins on the
back of the mower. Release the deflector.
FIGURE 13.
C:ONTROLS
Throttle
Control
BLADE CONTROL HANDLE
WARNING
THIS CONTROL MECHANISM IS /
SAFETY DEVICE NEVER ATTEMP
TO BYPASS ITS
o p e r a t i o n
;
The blade control handle is located on the upper han
dle of the mower. See figure 14. The blade control han
dle must be depressed in order to operate the unit.
Release the blade control handle to stop the engine and
blade.
A
WARNING: The blade will be rotating
whenever the engine is running.
THROTTLE CONTROL
The throttle control is located on the side of the upper
handle. It is used to regulate the engine speed.
A
WARNING: The throttle control cannot be
used to stop the engine.
RECOIL STARTER
The recoil starter handle is attached to the handle. See
figure 14. Stand behind the unit in the operating posi
tion to start the unit.
10