MTD 240-650-000 - Manual (Page 13)

Model 650
PART LIST FOR MODEL 550 SH REDDER
.Ref. Part Color New Ref. Part Color New
Mo. No. Code Part No. No. Code Part
1 11476 Door Chip It 33 11459A Flail
2 710-0465 Hex Bdt 1/2-20 x 4.50” Lg.* 34 711-0564 Spacer 23/32" Lg.
3 711-0580 Clevis Pin 35 711-0578 Clevis Pin .50” Dia. x 3.0” Lg.
4 711-0579 Flail Spacer 7/32” Lg. 36 736-0237 Fl.-Wash. .406” I.D. x 1.25”
5 11455 Cutting Finger O.D. Hdn.
6 736-0921 L.-Wash. 1/2” I.D.* 37 736-0217 L.-Wash. 3/8” I.D. H.D.
7 726-0111 Palnut 3/16” Dia. 38 710-0151 Hex Bolt 3/8-24 x 2.0” Lg.
8 712-0922 Hex Jam Nut 1/2-20 Thd.* H.T.
9 714-0507 Cotter Pin 3/32” Dia. x 3/4" 39 14575-638 Flail Housing Ass'y.-Comp.
Lg.
40 732-0546 Torsion Spring .062 Dia. x 1.06
10 16568 Chute Delfector Lg.
11 712-0107 L.-Nut 1/4-20 Thd. 41 11477 Chip-lt Guide Ass'y.
12 710-0289 Hex Bolt 1/4-20 x .50" Lg.* 42 11478 Hinge Pin
13 714-0115 Sq. Key 1/4” x 2.00” Lg. 43 747-0531 Release Bar
14 13430 Impeller Assembly 44 712-0109 Wing Nut Elastic 1/4-20 Thd.
15 710-0157 Hex Bolt 5/16-24 x 3/4” Lg. 45 13431 Blade
16 736-0119 L.-Wash. 5/16” I.D.* 46 11460-638 Upper Leaf Ramp Section
17 14573 Hopper to Engine Mtg. Plate 47 16524-638 Lower Leaf Ramp Section
18 Engine 48 736-0264 Fl.-Wash. 5/16” I.D.
19 11464A Engine Mounting Plate 49 11481A-638 Hopper Assembly
20 712-0123 Hex Nut 5/16-24 Thd.* 50 710-0601 Hex Wash. Hd. Self-Tap Scr.
21 736-0119 L.-Wash. 5/16" I.D.* 5/16-18 X .75” Lg.
22 738-0521 Shaft 52 11454 Back-Up Plate
23 736-0170 Special L.-Wash. 5/16” I.D. 53 16522 Inlet Guide Assembly
24 726-0221 Push Cap 55 11480 Stop Washer
25 711-0494 Spacee 56 710-0542 Hex Bolt 5/16-28 x 8.38” Lg.
26 734-1056 Wheel Ass'y-Comp. (White) 57 735-0639 Spark Plug Boot (Optional)
734-1173 Wheel Ass'y-'Comp. (Silver) 58 11461B Upper Leaf Ramp Section
28 710-0624 Hex Bolt 5/16-24 x 1.50" Lg.* (Optional) N
29 712-0429 Elastic Lock Nut 5/16-18 Thd. 59 781-0420 impeller Hsg. Support Brace
30 710-0237 Hex Bolt 5/16-24 x .62” Lg.* -R.H. N
31 714-0144 Cotter Pin 1/8” Dia. x 1.00” 60 781-0421 Impeller Hsg. Support Brace
Lg.* (Special) -LH. N
32 736-0192 Fl.-Wash. .531” I.D. x .937 61 Part of Engine
O.D. X .09 — 764-0199 Bag (Not Shown)
— 723-0400 Safety Glasses (Not Shown)
*For Faster service obtain standard nuts, bolts and washers locally. If these items cannot be obtained locally, order part
number and size as shown on parts list.
638-Red
483 —Charcoal Gray When ordering parts if color or finish is important, use color code shown
at left. [i.e. (part no.) —638 for Red Finish]
The engine is not under warranty by the shredder manufacturer. If repairs or service is needed on the engine,
please contact your nearest authorized engine service outlet. Check the "Yellow Pages" of your telephone
book under "Engines —Gasoline."
Find It Fast
In The
Yellow Pages
NOTE
Specifications subject to change without
notice or obligation.
13