MTD 197-987A - Manual (Page 6)

ftwef ,
Take Off'
TURN BUCKLE
MOUNT TURN BUCKLE IN
TOP HOLE OF COVER BRACKET
FIGURE 13
ASSEMBLY INSTRUCTION FOR
BOOSTER SPRINGS 732-0246
(Used with Tiller Attachment 197-989A only)
Booster springs may be used with any accessories
which can be attached at the rear of the tractor.
NOTE
Booster springs cannot be used when
using the mowing deck attachment.
4. Hook one end of spring on clevis pin as shown in
figure 14.
5. Place the pull rod, flat washer and cotter pin back
on the clevis pin as shown in figure 14.
6. With a tube (as shown in figure 15), extend spring
forward and hook over the welded clevis pin on
the frame. (See figure 15.)
7. Secure the spring with a flat washer (07387) and a
cotter pin (714-0117) which is provided with the
springs. See figure 14.
1. Remove any attachment which may be on the
tractor.
2. Pull the lift lever all the way back to disengaged
position.
3. Remove cotter pin, flat washer and pull rod from
clevis pin at location shown in figure 14. 6