MTD 113-050A - Manual (Page 7)

13. Secure throttle control cable and brake cable
to upper and lower handles with cable ties (F).
------See figure 10.
Plastic
Cover
14. The starter rope and handle may be secured
with the plastic cover for shipping purposes.
Remove the piastic cover and discard. See
------ figure 11.
15. Slip the starter rope into the rope guide bolt
as shown in figure 11.
16. Check all nuts and boits for correct tightness.
FIGURE 11.
Starter
Rope
Rope
Guide
Bolt
15. With the spark piug wire disconnected and
grounded, depress the blade control handle
and pull the starter rope out from the engine.
16. Slip the starter rope into the rope guide bolt
------as shown in figure 12.
17. Check all nuts and bolts for correct tightness.
FIGURE 12.