MTD 112-060A - Manual (Page 6)

9. Check all nuts and bolts for correct tightness.
A
CAUTION
Please note that the chute deflector
on your mower is in an upright posi­
tion. It is held in the position by a
shipping biock. This block is used
for shipping purposes only. It must
be removed and discarded before
your mower is put into operation.
See figure 7.
FIGURE 7.
OPERATION
Caution
Do Not Operate Mower Unless
Guard Or Grass Catcher Is In Its
Proper Place.
FIGURE 8.
Keep hands and feet away from the chute area on
cutting deck. See figure 8.
1. Service engine with gasoline and oil as in­
structed in the separate engine manual
packed with your mower.
2. When ready to start engine, place throttle con­
trol lever in START position.
Start engine in accordance with instructions
in engine manual. After engine starts, move
throttle control lever to desired engine speed.
3. To stop engine, move the throttle control lever
to STOP position. Disconnect and ground the
spark plug wire to prevent accidental starting
while equipment is unattended.
Be sure that lawn is clear of stones, sticks, wire,
or other objects which could damage lawn mower
or engine. For best results and to insure more
even grass distribution, do not mow when lawn is
excessively wet.
IMPORTANT
If you strike a foreign object, stop
the engine. Remove wire from spark
plug, thoroughly inspect the mower
for any damage, and repair
the
damage before restarting and
operating the mower.