Husqvarna 36 - Manual (Page 3)

You will find one or more of the following warning labels on the saw In black printing on yellow background.
USA CAN
âs WARNING A
between any object Avoid contact between any object and the
guide bar tip. Contact can cause the chain
and guide bar to suddenly move upward
and backward, which may cause serious injury.
Use both hands on the handles. Follow all safety
precautions
in the operator's manual. Failure
to follow instructions could result in serious
personal injury.
Recomm. for
Husqvarna 36
Chain / Bar length / Bar nose sprocket
Husqvarna H30 / 16" /Max 10 teeth or
Husqvarna H30 / 18" /Max 10 teeth
Other low kickback comb, in operator's
manual.
A A WARNING
Avoid contact between any object and the
guide bar tip. Contact can cause the chain
and guide bar to suddenly move upward
and backward which may cause serious injury.
Use both hands on the handles. Follow all safety
precautions
in the operator's manual. Failure
to follow instructions could result In serious
personal injury.
Recomm. for
Husqvarna 41
Chain/Bar length / Bar nose sprocket
Husqvarna H30 / 16" /Max 10 teeth or
Husqvarna H30 / 18" /Max 10 teeth
Other low kickback comb, in operator's
manual.
CAUTION! /j\ ATTENTION!
For safe operation
follow all safety
precautions and
Instructions In
operator's manual.
Pour la sécurité
d'opération, observé
tous les réglements
et les instructions
dans le manuel
de l'utilisateur.
Chainsaws can be dangerous I
Les tronçonneuses peuvent être dangereuses !
Displacement below 3.8 cubic inches (62.3 cc) which comply with the kickback requirements of American National Standards Institute B 175.1 1991.
Husqvarna 36
OU001A001 O
MADE IN U.S.A
SERIAL No-PLATE
Each saw has a nameplate, fixed to the crankcase, with saw
model Identification and serial number.
On this plate Is also the country of manufacturing Identified.
Index
Before using your new chain saw..............................3
Safety Precautions.....................................................4
What is what on the saw............................................5
Technical specification...............................................5
Mounting guide bar and chain................................... 6
Fuelmix and chain oil.................................................7
Start and stop............................................................ 8
Chain brake............................................................... 9
Control and maintenance of the chain brake.............9
Maintenance and function....................................... 10
Starter device.......................................................... 11
Chain maintenance............................................ 12-13
Maintenance....................................................... 14-15
Carburettor......................................................... 16-17
Equipment needed.................................................. 18
General working instruction................................19-22