Ariens SNO-THRO 924326-ST1336LE - Manual (Page 7)

S
ection
2: S
afety
S afety A lert S ymbol
This is a safety aiert symboi. it means:
•ATTENTION!
• YOUR SAFETY IS INVOLVED!
When you see this symboi:
• BECOME ALERT!
• OBEY ITS MESSAGE!
S ignal W ords
The safety aiert symbol is used with the signal words
ADANGER, AWARNING and A
c AUTION and colors
to alert you to safety messages.
They are used in safety decals on the unit and with
proper operation and procedures in this manual. They
aiert you to the existence and relative degree of hazards.
Understand the safety message, it contains important
information about personal safety on or near the unit.
▲
IMMINENTLY HAZARDOUS SITUATION! If not avoided,
WILL RESULT in death or serious injury.
POTENTIALLY HAZARDOUS SITUATION! If not
avoided, COULD RESULT in death or serious injury.
A CAUTION
POTENTIALLY HAZARDOUS SITUATION! If not
avoided, MAY RESULT in minor or moderate injury. It
may also be used to alert against unsafe practices.
P ractices and L aws
Practice usual and customary safe working precautions,
for the benefit of yourself and others. Understand and
follow all safety messages. Be alert to unsafe conditions
and the possibility of minor, moderate, or serious injury or
death. Learn applicable rules and laws in your area.
R equired O perator T raining
Original purchaser of this unit was instructed by the seller
on safe and proper operation. If unit is to be used by
someone other than original purchaser; loaned, rented or
sold, ALWAYS provide this manuals and any needed
safety training before operation.
Notations
NOTE: General reference information for proper
operation and maintenance practices.
IMPORTANT: Specific procedures or information
required to prevent damage to unit or attachment.
S afety D ecals and L ocations
ALWAYS replace missing or damaged Safety Decals.
Refer to Figure 3 for Safety Decal locations.
r
.lllllllllllllfll,
ч' J
Figure 3
i))ilil(iililll)ii
A В
C D E
HOT SURFACES!
DO NOT touch parts which are
hot from operation. ALWAYS
allow parts to cool.
SAFETY INSTRUCTIONS
A. Attention! Your safety is
involved!
B. Read Owner/Operator Manual.
C. Keep people away from unit
while operating.
D. ALWAYS stand clear of
discharge area.
E. Shut off engine, remove key,
read manual before you
unclog, adjust or repair unit.
DANGER Rotating Parts!
ALWAYS Keep hands away
from rotating parts.
DANGER Auger!
ALWAYS Keep feet away from
rotating parts.
SAFETY
• Read operator's manual.
• Allow operation only by
properly trained adult, never
children.
• Stop engine and remove
ignition key prior to leaving
operator’s position for any
reason.
• Keep all controls, guards and
safety devices properly
serviced and functional.
• Never direct discharge towards
persons or property that may
be injured or damaged by
thrown objects.
Rev. 9/98 Ariens® 924 Sno-Thro