Operation – MTD 243-650A User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DRA'A/STRING
AMD LOCK
CHUTE
DEFLECTOR
7. Place the bag over the chute deflector. Pull on the
drawstring and lock. See figure 6.
FIGURE 6
OPERATION
BEFORE STARTING ENGINE
1. Fill fuel tank with fresh regular gasoline. Do not
mix oil with gasoline.
NOTE
A warm engine may not require
choking.
2. Fill crankcase with oil. Refer to separate engine
manual packed with your shredder.
TO START ENGINE
1. Place control lever (on engine) in "RUN" posi
tion. See figure 7.
2. For cold engine start, move carburetor control
to "CHOKE" position. See figure 7.
FIGURE 7
3. Pull rewind starter using a quick full arm stroke.
Keep a firm grip on the handle and return rop
slowly.
4. After engine starts, move choke lever on carbure
tor gradually to "OFF" position.