MTD 243-650A - Manual (Page 4)

NOTE
The right and left side of your shred­
der is determined from operator's
position.
ASSEMBLY
INSTRUCTIONS
TOOLS REQUIRED FOR ASSEMBLY
1. (1) 7/16" Open End or Box Wrench
2. (1) 1/2" Open End or Box Wrench
3. (1) Adjustable Wrench
Remove the shredder, hardware pack and all parts
and literature from the carton before discarding
carton.
FIGURE 1
•CONTENTS OF HARDWARE PACK
A (3)
B (4)
C (4)
D (4)
E (4)
F (4)
Hex washer head self-tapping screws
Hex screws 1/4-20 x 1/2" long
Hex center lock nuts 1/4-20 thread
Hex screws 1/4-20 x 1/2" long
Lock washers 1/4" screw
Hex center lock nuts 1/4-20 thread
FIGURE 2