Ariens 911 - Manual (Page 34)

Dealer Preparation
step 2
Unfold the handlebar. Select a safe comfortable
handlebar operating height, place hole in braces onto
pins on both sides of mower. (Refer to Adjustments
Section.)
On Professional models, nuts and bolts are used to
secure handlebar.
1. Handlebar Height Adjustment Holes
Figure 16: Handlebar Set-up
Step 3 (Self Propelled Models)
On self propelled models, Speed Selector rod is
shipped
on handlebar with hardware in position.
Remove hair pin and washer, insert bent end of rod
through hole in swivel of speed control bell crank,
place washer onto rod and retain with hair pin.
1. Speed Selector Rod
2. Speed Control Bell Crank
3. Washer
4. Hair Pin
5. Swivel
Figure 17: Speed Selector
Step 4
Assemble grass bag onto bag frame by sliding bag
over frame (longest side of bag is top and goes over
long side of frame).
3. Bag Molding
Figure 18: Grass Bagger
32