Troy-Bilt 12157 - Manual (Page 3)

CONGRATULATIONS on your purchase of the TROY-
BILT Mini-Tiller / Cultivator. It has been designed, en­
gineered and manufactured to give you the best pos­
sible dependability and performance.
Should you experience any problems you cannot eas­
ily remedy, please contact your nearest authorized
Dealer or the Factory.
Please read and retain this Manual. The instructions
will help you assemble and maintain your machine
properly. Always observe the “SAFETY RULES.”
PRODUCT SPECIFICATIONS
HORSEPOWER: 1.6 HP
DISPLACEMENT: 2.0 CU. IN.
FUEL CAPACITY; 20 ozs.
(24:1 gasoline to 2-cycle oil mixture)
SPARK PLUG (GAP 0.030-in.):
Champion CJ-6Y*
or equivalent
IGNITION Electronic
NET ENGINE WEIGHT 7.5 LBS.
MODEL NUMBER; 12157
SERIAL
NUMBER:_______________
DATE OF
PURCHASE:_
THE MODEL AND SERIAL NUMBERS WILL BE
FOUND ON A DECAL LOCATED ON THE HAN­
DLEBARS OF YOUR MACHINE.
YOU SHOULD RECORD BOTH THE SERIAL
NUMBER AND DATE OF PURCHASE AND KEEP
IN A SAFE PLACE FOR FUTURE REFERENCE.
* In Canada, replace spark plug with a resistor plug.
WARNING: This machine is equipped with an internal
combustion engine and should not be used on or near
any unimproved forest-covered, brush-covered or
grass-covered land unless the engine’s exhaust sys­
tem is equipped with a spark arrester meeting appli­
cable local or state laws (if any). If a spark arrester is
used, it should be maintained in effective working
order by the operator.
In the state of California the above is required by law
(Section 4442 of the California Public Resources
Code). Other states may have similar laws. Federal
laws apply on federal lands. This engine is not
equipped with a spark arrestor for the muffler. A
spark arrester for the muffler is available through your
nearest authorized Engine Dealer.
This machine meets voluntary safety stan­
dard B71.8 - 1986, which is sponsored by
the Outdoor Power Equipment Institute, Inc.,
and is published by the American National
Standards Institute.
TROY-BILT FACTORY
DIRECT 30-DAY TRIAL
TROY-BILT Mfg. wants you to be completely satisfied with your prod­
uct. If you are not totally satisfied with the condition or performance of
your TROY-BILT product, you may exchange your product or receive a
refund of the purchase price of your merchandise. To receive your re­
fund, you must contact us within 30 days after you receive your order,
and follow the return instructions.