Applique work – SINGER W1810 User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
23. APPLIQUE WORK
Set machine as shown.
Sew around outline with zigzag stitch adjusting
stitch length and width according to shape
and size of cut-out and type of base material.
To change direction at corners, or to sew very
small circles, stop machine, positioning needle
just away from edge of cut-out, lift presser foot
and turn material.
Lower presser foot and continue sewing.
Sew a few stitches at end with zigzag width
at 0.
This is to prevent unstitching.
This manual is related to the following products: