Drop feed lever, Foot pressure – SINGER W1810 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
11. DROP FEED LEVER
The lever is in the right side of shuttle cover.
For normal sewing, move the lever to
position.
To lower feed dog, move the lever to
position.
This position is used for button sewing, darning
and embroidery.
12. FOOT PRESSURE
Normal sewing; Usually for straight sewing
or zigzag sewing, pressure pin (a should be
maintained in the lower position. While the
advancement is normal, drop feed lever is on
^ position.
Thin or delicated fabric sewing: Because lighter
pressure is desirable for perfect sewing of fine
silk or weak fabric, pressure button should be
adjusted in the middle.
Loosen pressure with outer ring and then
push pressure pin ^ half way towards the
bottom.
Oversewing and embroidering: To be able to
move fabric freely in case of darning,
mending and embroidering, loosen pressure
pin® by pushjng outer ring'S, move drop
feed lever to
aa
position.
-24-