2) determine length, 3) determine width, 4) buttonhole sewing – SINGER W1810 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(2) Determine length
Measure diameter and thickness of button
and add 0.3cm (1/8") for bar tacks.
Mark buttonhole size on material.
marking
(3) Determine width
Determine width according to diameter of
button, its thickness, and kind of material.
Completely push back sliding part @ of
buttonhole foot.
Place material under foot so that marking of
buttonhole passes through center of foot and
arrow (b, of foot indicates beginning line of
marking.
(4) Buttonhole sewing
Bar tacking: Set pattern selection dial to 1
(Qi
and sew 5-6 stitches.
This manual is related to the following products: