SINGER W1777 User Manual

Page 50

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Oiling

Use oil manufactured specially

for sewing machine use. Other

oils

will

eventually

cause

mechanism to jam.

Apply one drop of oil to part of

shuttle where friction occurs.

Open face cover and apply oil in
the same way.

Be careful not to apply too much

oil or it may stain your material

and cause some sewing difficulty.

After oiling, run machine for 1-2

minutes to allow oil to penetrate
to every part.

Remove Top Cover:

Pull out spool pins and push

bobbin winding spindle to right.

Loosening screws @ and ® with

large screwdriver, then take off

top cover.

\pply one drop of oil to lubricating points indicated by

^----------—-------------- ------------ ----------------------------------------- --------

arrows.

-46-