Changing light bulb – SINGER W1777 User Manual

Page 49

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

PROBLEM

PROBABLE CAUSE

CORRECTION

The material
puckers

Upper or lower thread tension too tight

Stitch too long for material

P.12, P.20

P.18

Thread too thick

P.16

Incorrect threading of upper or lower thread

P.13, P.11

Breaking needle

Needle not correctly inserted

P. 6

Needle bent

P. 6

Needle clamp screw too loose

P. 6

Upper thread tension too tight

P.20

Needle too fine for the material

P.16

Dials have been changed while the needle
was down in the material

P.18, P.22

Zigzag width set more than 2.5 while twin
needle was attached

P.14

trouble !S still apparent in the machine, please consult your nearest dealer.

0 not try to correct fault by yourself.

Changing Light Bulb

Unplug the machine.

Open face cover as shown.

Remove bulb by unscrewing it

in counterclockwise.

Install a new bulb by screwing it
in clockwise.