SINGER WF111 User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Fifbi of all, loüstu tbt luck screws

tBi

and set liic

stopper (C) at desired width position respec

tively. Tighten the lock screws (B) setting the

zigzag width stopper (C) at the number desired.

Thus, a running zgzag stitching is made.

The lock screws move the width stoppers (C) right

and left at the same time.

Set

the

width

stoppers fCi at

the number

graduated on

the plate. The

numbers indicate

the

width of zigzag stitches in MILLIMETERS when the Zigzag width lever (A) set to “4”, the

width of Zigzag stitches become the largest and when the lever (A) is set to "O", to extreme

left, the stitches will be straight as in an ordinary manner.