Adjusting pressure on material – SINGER WF111 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ADJUSTING PRESSURE ON MATERIAL
This is located on the top of the machine directly
over the presser bar and presser foot. Pressuie on
material must be varied according to the materials
to be sewn. Instead of ordinary Presser Regulat
ing
Thumb
Screw',
this
machine
is
equipped
with
Darner
(Patch-O-Matic)
for
quicker
and
easier adjustment of pressure of presser foot on
material.
The
pressure
wall
be
increased
simply
by
pressing
downward
on the top
of regulator
until the desired tension is obtained. When the
regulator is at its bottom, the maximum pressure
shall be given. To lessen the pressure, turn the
body clockwise by which will automatically jump
up inside part of regulator reducing the pressure
to
the
minimum.
In
this
position,
mending,
darning,
monogram
work
et4,
may
be
done
by
^
moving
material
slowly
by
hand
while
running
I;
'
machine at a fair speed. It is worth remembering
that the heavier the material, the heavier the
pressure and the lighter the material, the lighter the pressure. When, however, is applied more
than
necessary,
it
will
cause
heavy
running
of
the
machine,
hence
pressure
must
alw'ays
be
adjusted within the suitable limit.
14
-