Oiling (general) – SINGER W811 User Manual
Page 55
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
[CHANGING LIGHT BULB
^
^
O pen
the face plate by pulling towards the left. Turn the light buib
I
counterclockwise to remove. Replace the bulb by turning
I clockwise.
A majority of service calls could be avoided by following these
procedures and by first checking to see that the machine is:
1. Threaded properly top and bottom.
2. That the bobbin is wound evenly.
3. That the needle is in the machine correctly.
14. Proper cleaning and oiling.
OILING (GENERAL)
OIL
OIL
OIL
OIL
OIL
Swing
open
hinged
face
plate.
Apply
one
drop of oil at all points indicated by arrows.
OIL
OIL
OIL OIL OIL
Using the large screw driver in the accessory box, remove
the two screws on the top plate and remove plate.
OIL
Remove screw on the bed cover plate and
apply oil while turning the hand wheel.
49
- 401A (116 pages)
- Simple 3116 (94 pages)
- 1507 (88 pages)
- 1507WC (88 pages)
- 112W140 (32 pages)
- 147-2 (30 pages)
- 114-33 (43 pages)
- 119-3 (23 pages)
- 14K1 (10 pages)
- 147-104 (34 pages)
- 116-1 (20 pages)
- 115-2 (38 pages)
- 14U286 (40 pages)
- 14U286B (21 pages)
- 114-4 (29 pages)
- 142W25 (10 pages)
- 147-81 (28 pages)
- 118 (16 pages)
- 136W105 (22 pages)
- 114-41 (20 pages)
- 147-4 (28 pages)
- 105-3 (30 pages)
- 1027 (36 pages)
- 147-26 (37 pages)
- 12W208 (25 pages)
- 128-4 (25 pages)
- 109-320 (14 pages)
- CP17 (47 pages)
- 147-6 (56 pages)
- 132B26 (9 pages)
- 114-2 (36 pages)
- 1371A3 (86 pages)
- 14CG754 (53 pages)
- 147-50 (39 pages)
- 14T967DC (3 pages)
- 109-520 (13 pages)
- 14SH654 ULTRALOCK (48 pages)
- 147-86 (30 pages)
- 105-20 (23 pages)
- W303 (13 pages)
- 147-38 (53 pages)
- 114-22 (45 pages)
- 1375A1 (33 pages)
- 107-2 (31 pages)
- 1200A (4 pages)