Installing sewing head in cabinet, Installation-head in cabinet – SINGER W1776 User Manual

Page 50

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

INSTALLING SEWING HEAD IN CABINET

1. Ic30sen head hinge set screws unti\ head

hinge hole is clear.

2. Till head hinge fingers up and back as

far as they will go.

3. Carefully slip head onto head hinges

--making sure fingers are inserted as far

as they can go into head hinge holes.

4. Albw the head to rest in its lilledback

position.

5. Tighten both set screws securely with

screw driver.

6. Plug electrical leads into sockets bcated

inside cabinet. Cord identified with

“motor” tog must be plugged into socket
marked "motor" Untogged cord goes to

“lighi’’ socket.