Binder, Folded binding (fig 74, Two-tone binding (fig 75) – SINGER W1776 User Manual
Page 39: Folded binding, Two-tone binding, Hand-cut bias binding, Ftgr-73
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
38
BINDER
■'
matertal in one operation
Slots on scroll of the binder ore for corresponding widths of commercially folded bi The open mouth of binder scroll is used for unfolded bios strips cut ^ inch wide FOLDED BINDING (Fig 74 Cut folded binding to a point, (insert in appropriate slot. Draw through slot and under binder with strong pin. stitching to be sure it is on the edge. Adjust by sliding binder to right or left. TWO-TONE BINDING (Fig 75) Two bindings can be sewn on fabric edge also in one operation. When two are used, always skip one size be tween widths, inserting each in correct size slot. HAND-CUT BIAS BINDING (Fig 74) Cot inch bias binding fold in half for a couple O' joches. Cut binding diagonally toward end, almost to fold. Slip fold into center of binder. Draw back until cut opens and binding encircles open end of scroll. Test stitching to be sure it is on the edge, adjust if necessary. See Figs. 72 and 73 for sug gestions on how to use the binder. There are hundreds of other uses. 73 Fig. 74 -Ftgr-73-