Pressure adjusting lever, Presser foot lifter, Thread cutter – SINGER 384.18024 (Sold at Sears) User Manual
Page 8: Extension table detaching the table, Attaching the table, Accessory box, Pressure adjusting lever presser foot lifter
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Pressure Adjusting Lever
(T) Pressure adjusting lever
The pressure adjusting lever should be set at “3” for regular
sewing.
Reduce pressure to “2” for applique, cut work, draw work and
basting.
Set pressure at “1” when sewing chiffon, lace, organdy and
other fine fabrics. Velour and knits with a lot of stretch may also
require pressure at “1”.
Presser Foot Lifter
(T) Presser foot lifter
®
Normal up position
(D Highest position
The presser foot lifter raises and lowers the presser foot.
You can raise it about 1/4”(0.6 cm) higher than the normal up
position for easy removal of the presser foot or to help you
place heavy fabric under the foot.
Thread Cutter
® Thread cutter
You do not need a pair of scissors to cut threads after sewing.
Just use the built-in thread cutter.
Extension Table
Detaching the table;
Pull the table away from the machine, as illustrated.
Attaching the table:
Push the extension table until it snaps into the machine.
® Extension table
@ Projection
©Hole
Accessory Box
Open the cover of the accessory box toward you. Sewing
accessories are conveniently located in the box.