Threadtngmmhine, Threading machine, O f t – SINGER 30518 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

THREADtNGMMHINE
O f T ^
©
1. Turn power off.
2. Raise needle.
3. Raise presser foot.
4. Raise spool pin and
Place felt and thread
onto spool pin.
5. Pull thread into thread
guide.
(refer to page 7.)
6
.
Follow arrows, guide
thread into threading
channel and up to
take-up lever (1).
7. Thread take-up lever
eye (1). (Take-up lever
is slotted for easier
threading)
Pull down 6"~8" of
thread. (Thread should
be easy to pull)
Lower presser foot
and again pull down
6"~8" of thread.
(Thread should be
more difficult to pull)
If thread is difficult to
pull, tension discs are
threaded properly.
Continue to step 8.
If thread pulls the
same with presser foot
up or down go back to
step 6 and rethread
ensuring thread is
pulled into tension
disc channel (2).
8
.
Pull thread through
thread guide.
9. Thread needle from
front to back.