SINGER W1444 - Manual (Page 18)

REGULATING THE PRESSER FOOT PRESSURE
3. Insufficient pressure may cause poor feeding,
skipped stitches, or difficulty in guiding the fabric.
4. No pressure adjustment is required when darn­
ing or sewing embroidery.
DROP FEED
in
ig
se
It
se
s)
se
Tjjere are a few times when you want to control the feeding of fabric by your-
Raise needle bar to its highest position and raise presser foot, place daring plate
over needle plate aligning two pins of darning plate with holes of needle plate
You may then determine the movement of the fabric by yourself. See page 20
for button sewing application - 1 3 -