Curved seams, Sewing across heavy seams, Removing the work – SINGER W426 User Manual
Page 23: Curved seams sewing across heavy seams
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CURVED SEAMS
Use slightly shorter stitch length
than that of the rest of the seams.
On the part where elasticity is
required on the seam, sew by
stretch stitch. The cloth guide may
be used an angle as shown.
■ t' ■
SEWING
ACROSS
HEAVY
SEAMS
When approaching heavy searn,
hold the fabric upward on an angle
so that the heavy seam falls under
the front curved sled of presser
foot.
REMOVING THE WORK
Be, sure to stop the machine when
the thread take-up lever or needle
bar is at the highest position.
Now raise the presser foot and draw
the fabric back and to the left
and pass the threads over the
thread cutter.
Pull down slightly, holding thr®^°
in both hands, so as not to bend the
noodle
Leave
the ends of threads under
the presser foot.
IT t'
22