SINGER W160 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
02
/
01/2008
letting up your rrachine
On the base of the machine there is
a rating plate with information
about voltage and frequency. Be
fore you connect the machine to an
electrical outlet make sure that the
voltage indicated on the rating plate
conforms to that of the electrical
outlet.
1. Connect the machine plug.
2. Connect the wall plug.
3. Speed is asntrolled by means of
the foot control.
Changing light bulb
1. Open the face cover in the di
rection of the arrow.
2. Remove the bulb through turn
ing it counter clockwise.
3. Install a new bulb through turn
ing it clockwise.
4. Use a bulb with screw base 120
V/15 W (max.)
_
5
_