Changing presser foot, Remove the presser foot – SINGER W160 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
02
/
01/2008
1, Let the needle enter the fabric and raise
the presser foot. Turn the fabric around
the needle in the new direction.
Changing presser foot
The presser feet are of the snap—on type.
Remove the presser foot
2. Lower the presser foot and continue to
sew.
1. Raise the needle to its highest position.
2. Raise the presser foot lifter.
3. Press the lever on the back of the foot holder
and the presser foot will be released.
1. Place the presser foot on the stitch plate so
the pin on the foot is exactly under the
groove of the foot holder.
2. Lower the presser foot lifter and the presser
foot snaps on.
This manual is related to the following products: