Removing the bobbin case and bobbin, Inserting the bobbin, Inserting bobbin case – SINGER W160 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
02
/
01/2008
R e m o v i n g t h e b o b b i n c a s e a n d b o b b i n
1. Raise the needle to its
highest position. Open
the shuttle cover.
2. Open the latch on the
bobbin case and pull
the bobbin case out of
the machine.
3. Release the lat'h and
the bobbin will fall out.
I n s e r t i n g t h e b o b b i n
1. Pull out abt.Bcm thread
from the bobbin and
insert the bobbin into
the bobbin case as illu
strated.
2, Guide the thread th
rough the slot.
Thread tension spring
3. Pull the thread through
the slot and under the
tension spring and draw
out about 10 cm thread
This manual is related to the following products: