Threading the bobbin case – SINGER W1315 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

THREADING THE

BOBBIN CASE

Step 1 (illustrated in Fig. 6).

Hold bobbin case between thumb

and forefinger of left hand, so that
the slot in the edge of the bobbin

case is on top. Take the bobbin
between thumb and forefinger of

right hand so that the thread on
top leads from left to right. Step

2. Insert bobbin into bobbin case,
pull the thread into the slot of the
bobbin case as shown in Fig. 7, and

draw it under the tension spring
and into the fork shaped opening
of the spring as shown in Fig. 8.

l o T'

Fig. 5

TENSION SPRING

Fig. 7

Fig. 8