Machine no. 115-1, Instructions for ordering, List of parts complete – SINGER 115-1 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

INSTRUCTIONS FOR ORDERING
In ordering from this list, use ONLY the part NUMBER
in the FIRST column.
The number stamped on a Sewing Machine part is in every
case the number of the single part only.
Every combination of parts sent out as such has its specific
number, which, although not stamped on the parts, must be
used when ordering the combination.
Each number always indicates the SAME PART in whatever
list it appears, or for whatever machine.
The letters after some of the numbers indicate the style of
finish only, as follows;
A. Hardened, Polished and Plated.
Polished and Plated
Hardened only.
Polished only.
Soft, not Polished.
Hardened and Polished.
B.
c.
D.
E.
F.
G.
H.
J.
K.
L.
M.
P.
R.
Blued.
Plated only.
Hardened and Plated.
Brass or Gilt.
Oxidized.
Japanned.
Parkerized.
These letters MUST BE USED when they appear in the list,
and AFTER the number as in the list.
In this series
1 to 1500 and 50001 to 51500 are Screw Numbers.
1501 to 1800 are Nut Numbers.
1801 to 2000 are Roller Numbers.
2001 to 50000 and 52001 and upward are numbers of
Machine Parts.
The figures in the second column refer only to the plates,
illustrating the parts, and are NOT TO BE USED in ordering.
Parts marked with an asterisk (*) are furnished only when
repairs are made at factory.
LIST OF PARTS COMPLETE
FOR
MACHINE No. 115-1
FOR FAMILY USE, ROTARY HOOK, H. 0.
NO. PLATE
NAME
*55601 -------- - Arm with 450c, 2006 and 2803..............................
2002 6307
“ Dowel Pin......................................................
138
e
6308 “
Screw..........................................................
55602
6300 “
Shaft............................................................
2006 6302
“
“
Bushing (back)..............................
450c 6302
“
“
“
“
Set Screw-------
♦2803 -------- “
“
“
(front).............................
55513
4917 “
Side Cover...................................................
286
b
6308
“
“
“ Thumbscrew..............................
2007
6307
“
Spool
Pin................................................
8879 6307
“
“
“ Washer (cloth)...........................
15282 6300 Balance Wheel, 21^ in. pulley....................................
*55003 -------- Bed...........................................................................
5.5604 -------- “ Slide.....................................................................
55605
6301 Bed Slide complete, Nos. 2824, 55604 and
two 50216J............................ )........................
2824 6307 Bed Slide Spring.........................................................
502 16
j
6307
“
“
“ Screw........................................
256
b
6301 Clamp Stop Motion Clamp Screw...........................
248
a
6307
“
“
“
“ Stop Screw. .
2020 6301
“
“
“
“ Washer.....
*15312--------- “
“
“
Flanged Bushing....
15313 6301
“
“
“
“
“ 15312
with two 462c..................................................
2022 6307 Clamp Stop Motion Flanged Bushing
Pin................ ..................................................
4G2c 6306 Clamp Stop Motion Flanged Bushing
Set Screw........................................................
15314 ------ Clamp Stop Motion complete. Nos. 248
a
,
256
b
, 2020 and 15313....................................
55606
6300 Crank Connecting Rod with 1994, 55607
and two 1057
e
.................................................
*55607 -------- - Crank Connecting Rod Cap...................................
1057
e
6302
“
“
“
“ Screw................
1994
6302
“
“
,
“
Roller and
Stud..
55608
6302
“
“
“
Slide Block.......
55609
6302
“
“
“
“ “ Hinge
Pin...................................................................