Chain off and test sew – SINGER 14U11 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
5. Chain off and test sew
When the machine is completely threaded,
place a piece of the fabric to be sewn complete
ly under the presser foot.
Hold the needle thread with a slight tension as
shown in figure at left and turn the machine
pulley towards you 2 or 3 turns.
After threading for the first time or when
rethreading due to thread breakage during
sewing, repeat the above.
Thread cutter
After completing the seam,
chain off approx. 5cm (2 inches)
as shown in figure at left and
cut thread with the thread cut
ter on the presser foot.
13
This manual is related to the following products: