SINGER 185K User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Corded Welting
Cable cord comes in a variety of sizes and when covered with a firmly woven fabric makes a
corded welting that is an excellent seam finish.
This welting is prepared in advance and then stitched into the seam. Cut a true bias strip
inches wide, plus three times the width of the cord of either self or contrasting fabric. Sew
strips together on the lengthwise grain to obtain desired length.
• Adjust zipper foot to left side of needle.
• Encase cord in bias strip, raw edges even.
• Lower presser bar.
• Stitch close to cord, using a stitch length
slightly longer than for plain seaming of
same fabric.
• Do not crowd stitching against cord.
29