SINGER W219R User Manual

Page 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

INSTALLING SEWING HEAD IN CABINET

1. Loosen both head hinge set screws until

head hinge hole is clear.

Tilt head hinge fingers up and back as far

as they will go.

Carefully slip head onto head hinges-

making sure fingers are inserted as far as
they can go into head hinge holes.

Allow the head to rest in its tiltedback
position.

Tighten both set screws securely with screw

driver.

6. Plug electrical leads into sockets located

inside cabinet. Cord atUched ‘'motor"

tag must be plugged into socket marked

"motor”. Untagged cord goes to "light"

socket.