SINGER W219R - Manual (Page 17)

27
CLEANING AND OILING THE SHUTTLE fSee Fig. 37 and 38|
^'°8ged with loose threads and Mnt, This
Mfeguard the performance. To remove the shuttle assembly, proceed as follows-
■ h7nges " Tilt head back on its
2.
Remove bobbin case (A , Fig 37)
'■ JnTsh'u^le'rody Sr "" --- -e cover ,C,
A B
Fig. 37
; p:":rr ;:rr^—^
. lace shuttle body, (D), against shuttle driver and adjust into position
'r* ri'*;r:,iS' !m
7
■'
into position. ^"^pped securely
Put bobbin Into bobbin case.
28
3.
4.
CARE AND MAINTENANCE OF YOUR MACHINE
How to Oil Your Machine
your machine should be oiled occasionally to keep it
operating smoothly, how often depends on the amount
of sewing you do.
Before oiling the upper part of the sewing unit at points
indicated by arrows in Fig. 39 turn hand wheel
toward you until the take-up lever is at its lowest point