SINGER W219R - Manual (Page 16)

25
THE ADJUSTABLE CORDING AND ZIPPER FOOT
This attachment is used to make and insert
covered cording and to sew in zippers. Loosen
thumb screw to slide foot to either right or left
of needle.
CORDING. Fold bias strip of fabric over cord.
Loosen thumb screw and set foot so needle is
centered in needle hole. Machine bastes cord in
place (Fig. 31).
To sew covered cord to material, reset adjus­
table foot so needle stitches closer to cord, and
on edge of base fabric.
Fig. 31
SEWING IN ZIPPER
Loosen thumb screw and slide foot so needle enters center of
needle hole. Guide metal of zipper along edge of foot
(Fig. 32). Stitching should be close to zipper to allow easy
opening and closing. Adjust to sew from either right or left
side, whichever is more convenient.
quilting guide
Use this gtnde for making parallel rows of straight or decorative
stitching Attach standard presser foot. Slip U shaped holder on
screw (Fig. 34) Adjust the curved bar for the distance desired
Bv riRn'T ‘he fabric.
By letting the guide ride on the previous stitching line, successive
rows will be an equal distance apart (Fig. 34),
‘''9- Fig. 36
SEAM GAUGE OR CLOTH GUIDE
'“=«ht seams and even rows of
top stitching along edge of fabric (Fig. 33),
^ u'®’ 3'^eompanying screw (Fig. 36) in
threaded hole in bed of machine. Adjust to desired width*
Fig. 34