SINGER W801 - Manual (Page 26)

25
adjusting and changing V BELT
isition
Purely
f o
I lowing O'"®
,he instructions
Fig. 53
for adjusting and changing
Remove
three screws
holding rear cover (Fig. 53)
Fig. 54
the “V” belt:
by tipping it out at the bottom and
piv
oling ci'-ount
the hand wheel away from the front of the machine.
be It,
To ad|ost V
to tighten.
V” belt
loosen screws (A, Fig. 54,) and move bracket B up to loosen belt and
down
To remove
Remove top cover.
clutch (C, Fig. 53) .
“ a ” (Fig. 54)
A
B
C:
D
E
F,
and move bracket to its highest position.
Loosen
loosen screws
Slip belt off motor pulley and then over hand wheel.
R I ce ‘"V” belt by slipping it over hand wheel and then over motor pulley.
Adjust as
noted under No. 4.