Sewfng on a button inserttng a zipper – SINGER 6423 User Manual

Page 22

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SEWfNG ON A BUTTON

iNSERTtNG A ZIPPER

RECOMMENDED SETTINGS

stitch Selection: ^ig-Zag

Stitch Width;

I D I

Stitch Length; Feed cover

Presser Foot; Button sewing

• Attach feed cover.

• Raise thread through hole in the

feed cover.

• Center holes in button between

toes of foot.

• Lower needle into either hole of

button.

While slowly turning hand wheel,

adjust width so needle enters both

holes of button.

• Sew 8-10 stitches.

• Pull thread to back side and tie.

RECOMMENDED SETTINGS

Stitch Selection: Straight Stitch

Stitch Width:

j ' I I I I

Stitch Length: 1.5-3

Foot:

Zipper

• Baste zipper opening.

• Attach left side of foot to shank.

• Stitch zipper to seam allowance.

• Attach right side of foot to shank.

• Stitch zipper to seam allowance.

—

This manual is related to the following products: