Attachment foot – SINGER W128 User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
>i^*- < •^^^^^:*'':^-^зУ^
24
Fig. 26
THE EDGESTITCHER
The edgesticher is used in mak
ing lace insertions, edgings and pip
ings. The slots serve as guides. To
sew lace edging to fabric, place the
material you want on top of slot, Fig.
27, and the other piece in slot 4. Fig.
28
.
To trim with a wide piping, place
the fabric in slot 4, and the fold of
ATTACHMENT FOOT
In order to attach the binder, edgestitcher and the
hemmers, it is necessry to remove the presser foot and
replace it with the attachment foot. Fig. 26.
Mount
binder,
edgestitcher
or
hemmers
sliding
the
attachment to the left as for as possible and tigten
screw.
The mounting slot enables you to sew as close to
or as far away from the edge as desired. Just move the
attachment to the correct position before tightening the
mounting screw.
Fig. 28
Fig. 27
the piping to the left in slot
3
, for a narrow piping, place the fabric, in slot
2
and the folded
edge of the piping to the right in slot 3.
Slot 5 may be used as a guide in stitcing a French Seam.