SINGER W1410 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THE PATTERN SELECTOR
The desired pattern can be selected by turning the pattern selector dial. The marks on the dial correspond to the
patterns shown on the panel respectively, as follows:
M(
) straight stitch, middle needle position
0 (
—) ) straight stitch, left needle position
1-5 ( A/vw- ) zigzag stitch with variable width
Note: * Raise the needie-to its highest position Defore
turning the pattern selector.
zigzag stitch width should
be in the range "
"
(zigzag width between
■■0-2”
12-
This manual is related to the following products: