Darning, Quilting, Zurcido – SINGER 7011 User Manual
Page 36: Acolchado, Zurcido acolchado
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Darning
Worn or torn spots on children’s clothes and
household linens can be darned effortlessly
and quickly with little practice. When greater
control is needed, an embroidery hoop and
a special darning and embroidery foot, which
may be purchased at your SINGER stockist
should be used.
Recommended settings
Stitch Selection:
Straight Stitch
Needle Position:
stitch Width:
Stitch Length:
2-5
Foot:
General Purpose (B)
Needle Plate:
General Purpose (A)
Attach feed cover plate (F).
• If the area to be darned is open, baste a
backing on the underside.
• Place area to be darned, right side up,
under presser foot; lower the foot and begin
stitching, alternately drawing the fabric
toward you and pulling it gently away from
you.
•
Continue this forward and backward
motion as you fill the area in with parallel
lines of stitching.
Quilting
Quilting is the art of stitching two or more
thicknesses of fabric together in a planned
design. A padding is used to produce a soft,
puffed effect.
• Mark the design or quilting lines with a
tailors chalk or a washable marker on the
right side of garment.
• Place a wadding, or padding, over the
underside of garment and cover ft with a
backing or lining fabric.
• Baste together to prevent the layers from
moving.
• Place fabrics under needle and carefully
begin to stitch along your marked pattern
on the fabric.
• If you are quilting a very large piece, work
from the centre of the fabric to the outside
edge and guide fabric with both hands.
Zurcido
Las partes desgastadas o rotas de las ropas
de niños y de la ropa blanca del hogar, se
pueden zurcir sin esfuerzo y rápidamente
con un poco de práctica. Cuando precise
un mayor control del área de zurcir, adquiera
en su centro de costura un aro de bordar
y un prénsatelas especial para zurcir y
bordar.
Posiciones recomendadas
Selección punto: Punto recto
Posición aguja: L[X|»
Anchura punto: ]¡;^^'A/WWWWyyy\
Longitud punto:
2-5
Prénsatelas:
Uso general (B)
Plancha aguja:
Uso general (A)
Adaptar plancha cubre arrastre (F)
• Si el área a zurcir está abierta hilvane un
refuerzo en el revés,
• Coloque el área a zurcir, con el derecho
hacia arriba, debajo del prénsatelas, baje
este y empiece a coser, tirando del tejido
con suavidad hacia adelante y hacia atrás,
alternativamente.
•
Continúe realizando estos movimientos
según va llenando el área con líneas
paralelas de puntos.
Acolchado
Acolchar es el arte de coser dos o más
gruesos de telas en un diseño planificado.
Se utiliza un relleno para producir un efecto
blando o bufado.
Recommended settings
Posiciones recomendadas
Stitch Selection: Straight Stitch
Selección punto: Punto recto
Needle Position:
Posición aguja:
stitch Width: J^^wWWVWWlM
Anchura punto:
Stitch Length: 2-5
Longitud del punto: 2-5
Foot: General Purpose (B)
Prénsatelas: Uso generai (B)
Needle Plate: General Purpose (A)
Plancha aguja: Uso generai (A)
• En el derecho de la prenda, marque el
diseño o las líneas de acolchado con una
tiza o marcador lavable.
• Coloque el relleno sobre el revés de la
prenda y cúbralo con un forro de tejido
de lino.
evitar
sesgos
• Hilvánelo para
desviaciones.
• Coloque los tejidos debajo de la aguja y
empiece a coser con cuidado a lo largo
de las marcas realizadas.
• Si está acolchando una pieza grande, cosa
desde el centro del tejido hasta el borde
exterior y guíe el tejido con las dos manos.
34